Carpoly Multi-Purpose Epoxy Mastic Coating

The Coating Used on concrete floors and interior primed drywall, plaster and wood surfaces.

General Description:

A high performance, multipurpose, surface tolerant, two-component chemically cured epoxy semi-gloss coating for industrial applications. For use on properly prepared steel or masonry surfaces. Also used on concrete floors and interior primed drywall, plaster and wood surfaces. Use as a filler for open textured concrete block.

Typical Uses:

Ideal for structural steel, piping, tanks, and equipment in chemical, fertilizer, power plants, petroleum refineries, pulp and paper mills, water and sewage treatment plants and mining operations.

Advantages:

Excellent corrosion protection

Suitable for salt & fresh water immersion

Excellent solvent and chemical resistance resists

splash and spillage of solvents, alkalis, salts, moisture,

oils, greases, foodstuffs and detergents

Cold weather cure-Use cold weather additive for

application down to 25 F (-4 )

Surface tolerant abrasive blasting not required in

many applications

Excellent adhesion to tight rust

Low VOC

Self-priming on steel or masonry

Abrasion resistant

High build/high solids coating

Superior recoatability

Finish: Semi-Gloss

Color: off white

Reduction Solvent: CP-10 Thinner. For application over aged

alkyds use CP-5 Thinner

Clean-up Solvent: CP-10 Thinner

Weight/Gallon: 1.3 kg/L varies with color

VOC (EPA 24): 248 g/L

Solids By Volume: 71%

Theoretical Coverage at 1.0 Mil  Dry: 28.0 M2/L

Shelf Life: 24 months at 77 F (25 ) unopened

Mix Ratio By Volume: 6(base):1(converter) see mixing instructions.

Induction: 15 minutes @ 77 F (25 ) see mixing instructions.

Pot Life: 5 hours @ 77 F (25 ) & 50% R.H.

Carpoly Multi-Purpose Epoxy Mastic Coating